WattThe / Homeowner / Net metering by state

Homeowner tools

Net Metering Calculator by State

The same exported kWh is worth full retail in one state and a quarter of it next door. Model what your policy pays and what it does to your solar value.

Self-consumption value
at full retail rate
Export value
at policy export rate
Total annual value
Effective ¢/kWh
blended value of production
Ad — 728×90 leaderboard

Net metering, net billing, and why the difference matters

Classic net metering credits every exported kWh at the full retail rate — your meter effectively runs backward, and the grid acts as a free battery. Net billing, the direction policy has been moving, credits exports at a lower "avoided cost" value while you still pay retail for imports. California's NEM 3.0 is the marquee example: export values fell roughly 75% versus the old regime, which is why battery attachment rates on new California solar jumped immediately.

Under net billing, the share of production you consume on-site becomes the dominant value driver, because self-consumed energy is always worth full retail. Shifting loads into solar hours — running the dishwasher, pool pump, and EV charger midday — or adding storage to move evening consumption onto stored solar raises the effective value of every panel on the roof.

This calculator uses a simplified per-state export factor to make the mechanics visible. Actual tariffs vary by utility, vintage, and time of export — some avoided-cost schedules pay dramatically more during summer evening hours — so treat the output as a planning estimate and confirm the live tariff before signing anything.

Frequently asked questions

What is the difference between net metering and net billing?

Net metering credits exported solar at the full retail rate. Net billing credits exports at a lower avoided-cost rate while imports still cost retail — making self-consumption, and often batteries, much more valuable.

Is net metering still available in California?

New residential solar in California falls under NEM 3.0 (net billing), where exports earn avoided-cost rates far below retail. Systems approved under earlier NEM versions keep their legacy terms for a set period.

How can I increase the value of my solar under net billing?

Raise self-consumption: schedule flexible loads during solar hours, charge an EV midday when possible, and consider a battery to shift evening use onto stored solar instead of low-value exports.

Estimates are for planning and education, not engineering design or financial advice. Verify rates with your utility and confirm electrical work with a licensed engineer or electrician.

Get the full report

Join the WattThe list for state rate updates, new calculators, and a deeper walkthrough of your numbers. Commercial or data center project? Reply to any email for a feasibility review.

No spam. One or two emails a month, unsubscribe anytime.